Factors Influencing the Efficiency of Solar Energy Systems
DOI:
Abstract
The efficiency of solar panels is significantly influenced by temperature and irradiance, which are crucial in solar energy conversion. As temperatures rise, solar panel efficiency typically decreases due to increased electrical resistance, resulting in lower output voltage and power production. This efficiency loss is quantified by the temperature coefficient, indicating the drop per degree Celsius above 25°C. Advanced cooling systems and optimal thermal management can mitigate these effects. Irradiance, the sunlight intensity reaching the panels, directly affects electricity generation. While higher irradiance increases efficiency by providing more photons for conversion, it can also raise temperatures, negatively impacting performance. Solar panels achieve maximum efficiency under optimal irradiance and moderate temperatures, typically 1000 W/m² at 25°C. Variations in irradiance due to geographical location, time of day, and weather conditions cause fluctuations in power output. Efficient system design must consider local irradiance patterns and utilize tracking systems to maintain optimal panel orientation. To optimize efficiency, innovative methods such as advanced materials, cooling techniques, and smart tracking systems are employed. Additionally, integrating energy storage solutions and predictive analytics helps manage environmental impacts. Proper design, installation, and maintenance strategies are crucial for maximizing solar panel efficiency and lifespan under varying conditions. Understanding the interplay between temperature and irradiance is essential for advancing solar energy technologies, and enhancing their reliability and effectiveness in diverse environments.
Downloads
Views : 34
Downloads : 19
References
A. Hussain, S. M. Arif, and M. Aslam, “Emerging renewable and sustainable energy technologies: State of the art,” Renewable and Sustainable Energy Reviews, vol. 71, pp. 12–28, 2017.
S. S. M. Ajarostaghi and S. S. Mousavi, “Solar energy conversion technologies: Principles and advancements,” in Solar Energy Advancements in Agriculture and Food Production Systems, pp. 29–76, 2022.
M. Yamaguchi, F. Dimroth, J. F. Geisz, and N. J. Ekins-Daukes, “Multi-junction solar cells paving the way for super-high efficiency,” Journal of Applied Physics, vol. 129, no. 24, 2021.
V. H. U. Eze, O. Robert, N. I. Sarah, J. S. Tamball, O. F. Uzoma, and W. O. Okafor, “Transformative potential of thermal storage applications in advancing energy efficiency and sustainability,” IDOSR Journal of Applied Sciences, vol. 9, no. 1, pp. 51–64, 2024.
V. H. U. Eze, J. S. Tamball, O. F. Uzoma, I. Sarah, O. Robert, and W. O. Okafor, “Advancements in energy efficiency technologies for thermal systems: A comprehensive review,” INOSR Applied Sciences, vol. 12, no. 1, pp. 1–20, 2024.
K. Hasan, S. B. Yousuf, M. S. H. K. Tushar, B. K. Das, P. Das, and M. S. Islam, “Effects of different environmental and operational factors on the PV performance: A comprehensive review,” Energy Science & Engineering, vol. 10, no. 2, pp. 656–675, 2022.
V. B. Omubo-Pepple, C. Israel-Cookey, and G. I. Alaminokuma, “Effects of temperature, solar flux and relative humidity on the efficient conversion of solar energy to electricity,” European Journal of Scientific Research, vol. 35, no. 2, pp. 173–180, 2009.
J. M. Richter et al., “Ultrafast carrier thermalization in lead iodide perovskite probed with two-dimensional electronic spectroscopy,” Nature Communications, vol. 8, no. 1, pp. 376, 2017.
N. Keskar Vinaya, “Electricity generation using solar power,” International Journal of Engineering Research & Technology (IJERT), vol. 2, no. 2, pp. 1–5, 2013.
S. Bellani et al., “Solution-processed two-dimensional materials for next-generation photovoltaics,” Chemical Society Reviews, vol. 50, no. 21, pp. 11870–11965, 2021.
C. Sun, Y. Zou, C. Qin, B. Zhang, and X. Wu, "Temperature effect of photovoltaic cells: A review," Advanced Composites and Hybrid Materials, vol. 5, no. 4, pp. 2675-2699, 2022.
S. Dubey, J. N. Sarvaiya, and B. Seshadri, "Temperature dependent photovoltaic (PV) efficiency and its effect on PV production in the world–a review," Energy Procedia, vol. 33, pp. 311-321, 2013.
A. R. Amelia, Y. M. Irwan, W. Z. Leow, M. Irwanto, I. Safwati, and M. Zhafarina, "Investigation of the effect temperature on photovoltaic (PV) panel output performance," International Journal of Advanced Science Engineering Information Technology, vol. 6, no. 5, pp. 682-688, 2016.
M. Aghaei, A. Fairbrother, A. Gok, S. Ahmad, S. Kazim, K. Lobato, ... and J. Kettle, "Review of degradation and failure phenomena in photovoltaic modules," Renewable and Sustainable Energy Reviews, vol. 159, pp. 112160, 2022.
V. Sharma and S. S. Chandel, "Performance and degradation analysis for long term reliability of solar photovoltaic systems: A review," Renewable and Sustainable Energy Reviews, vol. 27, pp. 753-767, 2013.
M. S. Salim, J. M. Najim, and S. M. Salih, "Practical evaluation of solar irradiance effect on PV performance," Energy Science and Technology, vol. 6, no. 2, pp. 36-40, 2013.
A. Parretta, A. Sarno, and L. R. Vicari, "Effects of solar irradiation conditions on the outdoor performance of photovoltaic modules," Optics Communications, vol. 153, no. 1-3, pp. 153-163, 1998.
A. Al-Bashir, M. Al-Dweri, A. AlGhandoor, B. Hammad, and W. AlKouz, "Analysis of effects of solar irradiance, cell temperature and wind speed on photovoltaic systems performance," International Journal of Energy Economics and Policy, vol. 10, no. 1, pp. 353-359, 2020.
T. M. Razykov, C. S. Ferekides, D. Morel, E. Stefanakos, H. S. Ullal, and H. M. Upadhyaya, "Solar photovoltaic electricity: Current status and future prospects," Solar Energy, vol. 85, no. 8, pp. 1580-1608, 2011.
D. Leitão, J. P. N. Torres, and J. F. Fernandes, "Spectral irradiance influence on solar cells efficiency," Energies, vol. 13, no. 19, pp. 5017, 2020.
M. Alshawaf, R. Poudineh, and N. S. Alhajeri, "Solar PV in Kuwait: The effect of ambient temperature and sandstorms on output variability and uncertainty," Renewable and Sustainable Energy Reviews, vol. 134, pp. 110346, 2020.
T. Huld, and A. M. Gracia Amillo, "Estimating PV module performance over large geographical regions: The role of irradiance, air temperature, wind speed and solar spectrum," Energies, vol. 8, no. 6, pp. 5159-5181, 2015.
J. Coston, C. Robinson, B. King, J. Braid, D. Riley, and J. S. Stein, "Effects of Solar Angle of Incidence on Intramodular Photovoltaic Irradiance Uniformity," in 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC), pp. 1499-1503, 2021.
D. Meneses-Rodrı́guez, P. P. Horley, J. Gonzalez-Hernandez, Y. V. Vorobiev, and P. N. Gorley, "Photovoltaic solar cells performance at elevated temperatures," Solar Energy, vol. 78, no. 2, pp. 243-250, 2005.
S. Dubey, J. N. Sarvaiya, and B. Seshadri, "Temperature dependent photovoltaic (PV) efficiency and its effect on PV production in the world–a review," Energy Procedia, vol. 33, pp. 311-321, 2013.
B. R. Paudyal, and A. G. Imenes, "Investigation of temperature coefficients of PV modules through field measured data," Solar Energy, vol. 224, pp. 425-439, 2021.
K. Hasan, S. B. Yousuf, M. S. H. K. Tushar, B. K. Das, P. Das, and M. S. Islam, "Effects of different environmental and operational factors on the PV performance: A comprehensive review," Energy Science & Engineering, vol. 10, no. 2, pp. 656-675, 2022.
M. Rajvikram, and G. Sivasankar, "Experimental study conducted for the identification of best heat absorption and dissipation methodology in solar photovoltaic panel," Solar Energy, vol. 193, pp. 283-292, 2019.
H. K. Firozjaei, M. K. Firozjaei, O. Nematollahi, M. Kiavarz, and S. K. Alavipanah, "On the effect of geographical, topographic and climatic conditions on feed-in tariff optimization for solar photovoltaic electricity generation: A case study in Iran," Renewable Energy, vol. 153, pp. 430-439, 2020.
M. Jahanpanah, S. J. Sadatinejad, A. Kasaeian, M. H. Jahangir, and H. Sarrafha, "Experimental investigation of the effects of low-temperature phase change material on single-slope solar still," Desalination, vol. 499, pp. 114799, 2021.
N. S. Ganesh, and T. Srinivas, "Design and modeling of low temperature solar thermal power station," Applied Energy, vol. 91, no. 1, pp. 180-186, 2012.
P. K. Dash, and N. C. Gupta, "Effect of temperature on power output from different commercially available photovoltaic modules," International Journal of Engineering Research and Applications, vol. 5, no. 1, pp. v148-151, 2015.
M. Rajvikram, S. Leoponraj, S. Ramkumar, H. Akshaya, and A. Dheeraj, "Experimental investigation on the abasement of operating temperature in solar photovoltaic panel using PCM and aluminium," Solar Energy, vol. 188, pp. 327-338, 2019.
R. E. Pawluk, Y. Chen, and Y. She, "Photovoltaic electricity generation loss due to snow–A literature review on influence factors, estimation, and mitigation," Renewable and Sustainable Energy Reviews, vol. 107, pp. 171-182, 2019.
V. H. U. Eze, J. S. Tamball, O. Robert, and W. O. Okafor, "Advanced Modeling Approaches for Latent Heat Thermal Energy Storage Systems," IAA Journal of Applied Sciences, vol. 11, no. 1, pp. 49-56, 2024.
V. Svoboda, H. Wenzl, R. Kaiser, A. Jossen, I. Baring-Gould, J. Manwell, and D. U. Sauer, "Operating conditions of batteries in off-grid renewable energy systems," Solar Energy, vol. 81, no. 11, pp. 1409-1425, 2007.
M. E. Meral and F. Dincer, "A review of the factors affecting operation and efficiency of photovoltaic based electricity generation systems," Renewable and Sustainable Energy Reviews, vol. 15, no. 5, pp. 2176-2184, 2011.
N. A. Naamandadin, J. M. Chew, and W. A. Mustafa, "Relationship between Solar Irradiance and Power Generated by Photovoltaic Panel: Case Study at UniCITI Alam Campus, Padang Besar, Malaysia," Journal of Advanced Research in Engineering Knowledge, vol. 5, no. 1, pp. 16-20, 2018.
G. K. Singh, "Solar power generation by PV (photovoltaic) technology: A review," Energy, vol. 53, pp. 1-13, 2013.
D. Rekioua and E. Matagne, Optimization of photovoltaic power systems: modelization, simulation and control, Springer Science & Business Media, 2012.
A. Teke, H. B. Yıldırım, and O. Çelik, "Evaluation and performance comparison of different models for the estimation of solar radiation," Renewable and Sustainable Energy Reviews, vol. 50, pp. 1097-1107, 2015.
M. E. Meral and F. Dincer, "A review of the factors affecting operation and efficiency of photovoltaic based electricity generation systems," Renewable and Sustainable Energy Reviews, vol. 15, no. 5, pp. 2176-2184, 2011.
R. Nasrin, M. Hasanuzzaman, and N. A. Rahim, "Effect of high irradiation on photovoltaic power and energy," International Journal of Energy Research, vol. 42, no. 3, pp. 1115-1131, 2018.
A. Richmond, "Efficient utilization of high irradiance for production of photoautotropic cell mass: a survey," Journal of Applied Phycology, vol. 8, pp. 381-387, 1996.
J. Luke, L. Corrêa, J. Rodrigues, J. Martins, M. Daboczi, D. Bagnis, and J. S. Kim, "A commercial benchmark: light‐soaking free, fully scalable, large‐area organic solar cells for low‐light applications," Advanced Energy Materials, vol. 11, no. 9, pp. 2003405, 2021.
H. Mousazadeh, A. Keyhani, A. Javadi, H. Mobli, K. Abrinia, and A. Sharifi, "A review of principle and sun-tracking methods for maximizing solar systems output," Renewable and Sustainable Energy Reviews, vol. 13, no. 8, pp. 1800-1818, 2009.
F. Zaoui, A. Titaouine, M. Becherif, M. Emziane, and A. Aboubou, "A combined experimental and simulation study on the effects of irradiance and temperature on photovoltaic modules," Energy Procedia, vol. 75, pp. 373-380, 2015.
V. Perraki and P. Kounavis, "Effect of temperature and radiation on the parameters of photovoltaic modules," Journal of Renewable and Sustainable Energy, vol. 8, no. 1, 2016.
E. M. Vicente, P. dos Santos Vicente, R. L. Moreno, and E. R. Ribeiro, "High‐efficiency MPPT method based on irradiance and temperature measurements," IET Renewable Power Generation, vol. 14, no. 6, pp. 986-995, 2020.
J. C. Ogbulezie, A. O. Njok, M. K. Panjwani, and S. K. Panjwani, "The impact of high temperature and irradiance source on the efficiency of polycrystalline photovoltaic panel in a controlled environment," International Journal of Electrical and Computer Engineering, vol. 10, no. 4, pp. 3942, 2020.
V. H. U. Eze, O. N. Iloanusi, M. C. Eze, and C. C. Osuagwu, "Maximum power point tracking technique based on optimized adaptive differential conductance," Cogent Engineering, vol. 4, no. 1, pp. 1339336, 2017.
V. H. U. Eze, U. O. Oparaku, S. A. Ugwu, and C. C. Ogbonna, "A comprehensive review on recent maximum power point tracking of solar photovoltaic systems using intelligent, non-intelligent, and hybrid-based techniques," International Journal of Innovative Science and Research Technology, vol. 6, no. 5, pp. 456–474, 2021.
M. C. Eze, V. H. U. Eze, G. N. Ugwuanyi, M. Alnajideen, A. Atia, S. C. Olisa, V. G. Rocha, and G. Min, "Improving the efficiency and stability of in-air fabricated perovskite solar cells using the mixed antisolvent of methyl acetate and chloroform," Organic Electronics, vol. 107, pp. 1–10, 2022.
D. H. Li and T. N. Lam, "Determining the optimum tilt angle and orientation for solar energy collection based on measured solar radiance data," International Journal of Photoenergy, 2007.
V. H. U. Eze, M. C. Eze, V. Chijindu, C. E. Eze, S. A. Ugwu, and C. C. Ogbonna, "Development of improved maximum power point tracking algorithm based on balancing particle swarm optimization for renewable energy generation," IDOSR Journal of Applied Sciences, vol. 7, no. 1, pp. 12–28, 2022.
M. Sharaf, M. S. Yousef, and A. S. Huzayyin, "Review of cooling techniques used to enhance the efficiency of photovoltaic power systems," Environmental Science and Pollution Research, vol. 29, no. 18, pp. 26131-26159, 2022.
M. N. Kamarudin, S. M. Rozali, and M. S. Jamri, "Active cooling photovoltaic with IoT facility," International Journal of Power Electronics and Drive Systems, vol. 12, no. 3, pp. 1494, 2021.
S. Nižetić, A. M. Papadopoulos, and E. Giama, "Comprehensive analysis and general economic-environmental evaluation of cooling techniques for photovoltaic panels, Part I: Passive cooling techniques," Energy Conversion and Management, vol. 149, pp. 334-354, 2017.
J. Zhang, C. Wang, J. Shi, D. Wei, H. Zhao, and C. Ma, "Solar selective absorber for emerging sustainable applications," Advanced Energy and Sustainability Research, vol. 3, no. 3, pp. 2100195, 2022.
R. B. Mansour, M. A. M. Khan, F. A. Alsulaiman, and R. B. Mansour, "Optimizing the solar PV tilt angle to maximize the power output: A case study for Saudi Arabia," IEEE Access, vol. 9, pp. 15914-15928, 2021.
R. V. T. K. A. K. L. S. R. Guerrero-Lemus, R. Vega, T. Kim, A. Kimm, and L. E. Shephard, "Bifacial solar photovoltaics–A technology review," Renewable and Sustainable Energy Reviews, vol. 60, pp. 1533-1549, 2016.
C. Peike, I. Hädrich, K. A. Weiß, I. Dürr, and F. Ise, "Overview of PV module encapsulation materials," Photovoltaic International, vol. 19, pp. 85-92, 2013.
R. K. Varma, Smart solar PV inverters with advanced grid support functionalities, John Wiley & Sons, 2021.
X. Zhang, S. K. S. S. Y. Lau, and Y. Zhao, "Photovoltaic integrated shading devices (PVSDs): A review," Solar Energy, vol. 170, pp. 947-968, 2018.
Z. Wang, Z. Xu, B. Liu, Y. Zhang, and Q. Yang, "A hybrid cleaning scheduling framework for operations and maintenance of photovoltaic systems," IEEE Transactions on Systems, Man, and Cybernetics: Systems, vol. 52, no. 9, pp. 5925-5936, 2021.
L. M. Peter, "Towards sustainable photovoltaics: the search for new materials," Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 369, no. 1942, pp. 1840-1856, 2011.
A. H. Alami, A. G. Olabi, A. Mdallal, A. Rezk, A. Radwan, S. M. A. Rahman, and M. A. Abdelkareem, "Concentrating solar power (CSP) technologies: Status and analysis," International Journal of Thermofluids, vol. 18, pp. 100340, 2023.
M. Mussard and M. Amara, "Performance of solar photovoltaic modules under arid climatic conditions: A review," Solar Energy, vol. 174, pp. 409-421, 2018.
V. H. U. Eze, "Development of stable and optimized bandgap perovskite materials for photovoltaic applications," IDOSR Journal of Computer and Applied Science, vol. 8, no. 1, pp. 44–5, 2023.
