IoT Water Level Monitoring System
Abstract
In the era of globalization today, especially in Malaysia, the Malaysians are often busy with their career and forgot their responsibility to take care the water container or pail at their home which they used to fill water in. This research is designed to solve the problem by detect the level of water inside a container. It also give notification when the container was full. This research also designed to make easier to turn off the water tap whenever the container is filled up. Through this research, it also helps people surrounding to keep them remind about the level of water. The development of this research is using Arduino and Blynk application.
Downloads
References
B. Afzal, M. Umair, G. Asadullah Shah, E. Ahmed, “Enabling IoT platforms for social IoT applications: Vision, feature mapping, and challenges, Future Generation Computer, Systems,” [Online] Available: 10.1016/j.future.2017.12.002, [Acessed: 2021]
Cui, Xiaoyang, C. Tang, and Q. Zhang, “A review of electrocatalytic reduction of dinitrogen to ammonia under ambient conditions,” Advanced Energy Materials, vol. 8, no. 22, pp. 180-369, 2018.
Boyes, Hugh, B. Hallaq, J. Cunningham, and T. Watson, “The industrial internet of things (IIoT): An analysis framework,” Computers in industry, vol. 101, pp. 1-12, 2018.
Liu, Xiaojin, X. Wu, M. Zhong, H. Huang, Y. Weng, M. Niu, L. Zhao, and R. Huang, “Dynamic properties of human default mode network in eyes-closed and eyes-open, Brain Topography 33,” no. 6, pp. 720-732, 2020.
M. A. Azizi and A. Zariman, “Displaying Health Status Based IoT,” International Journal of Recent Technology and Applied Science, vol. 2, no. 1, pp.25-35, 2020.
W. N. A.W. Azahar, M. Bujang, R. P. Jaya, M. R. Hainin, A. Mohamed, N. Ngad, and D. S. Jayanti, “The potential of waste cooking oil as bio-asphalt for alternative binder an overview,” Jurnal of Technology, vol. 78, no. 4, 2016.
Ismail and M. J. Hendzel, 2008, “Is It Just a Surrogate Marker of Double‐Strand Breaks or Much More?” Environmental and Molecular Mutagenesis, vol. 49, no. 1, pp. 73-82, 2008.
M. H. Husin, I. D. and Hisham, “Smart Charger Based on Iot Concept,” International Journal of Education, Science, Technology, and Engineering, vol. 2, no. 1, pp. 39-44, 2019.
F. Anwar, S. Latif, M. Ashraf, M. and A. H. Gilani, “Moringa Oleifera: A Food Plant with Multiple Medicinal Uses,” Phytotherapy Research: An International Journal Devoted to Pharmacological and Toxicological Evaluation of Natural Product Derivatives, vol. 21, no. 1, pp.17-25. 2007.
F. A. Ghani, and A. Zariman, “Smart Cane based on IoT,” International Journal of Education, Science, Technology, and Engineering, vol. 2, no. 1, pp.12-18, 2019.
Azhari, Faezeh, and N. Banthia, “Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing,” Cement and Concrete Composites, vol. 34, no. 7 pp. 866-873, 2012.
Azizi, M. Arief, and A. Zariman, “Displaying Health Status Based IoT,” International Journal of Recent Technology and Applied Science, vol. 2, no. 1, pp. 22-35, 2020.
Saidatin, Naili, S. Nurmuslimah, and P. Bagus, “A Design Remote Control System to Feed Birds Using ESP8266,” International Journal of Recent Technology and Applied Science, vol. 2, no. 2, pp. 81-90, 2020.
A. Hermansyah, E. Sainsbury and I. Krass, “Community Pharmacy and Emerging Public Health Initiatives in Developing Southeast a Sian Countries: A Systematic Review,” Health & Social Care In The Community, vol. 24, no. 5, pp. 11-22, 2016.
Luukkonen, K. Panu, S. Sädevirta, Y. Zhou, B. Kayser, A. Ali, L. Ahonen, S. Lallukka, “Saturated Fat is More Metabolically Harmful for The Human Liver Than Unsaturated Fat or Simple Sugars,” Diabetes Care, vol. 41, no. 8, pp. 1732-1739, 2018.
Jangir, Pradeep, and N. Jangir, “A New Non-Dominated Sorting Grey Wolf Optimizer (NS-GWO) Algorithm: Development and Application to Solve Engineering Designs and Economic Constrained Emission Dispatch Problem with Integration of Wind Power,” Engineering Applications of Artificial Intelligence, vol. 72, pp. 449-467, 2018.
Jangir, Monika, R. Pathak, S. Sharma, and S. Sharma. “Biocontrol Mechanisms of Bacillus Isolated from Tomato Rhizosphere, Against Fusarium Oxysporum Lycopersici,” Biological Control, vol. 123, pp. 60-70, 2018.
Telagam, Nagarjuna, M. Nanjundan, Ne. Kandasamy, and S. Naidu, “Cruise Control of Phase Irrigation Motor Using SparkFun Sensor,” vol. 13, no. 8, pp. 192-198, 2017.
R. Zavala and Mauricio. Uppsala Universitet: Electronic Project- Heat Lock for Bikes, 2018.
D. Ben, a Business Plan. UK: One Shot Pub, 2019.
Sadek, Ramy, M. Kassem, M. Abdo, and S. Elbasuney, “Novel Yellow Colored Flame Compositions with Superior Spectral Performance,” Defence Technology, vol. 13, no. 1 pp. 33-39, 2017.
Blum and Jeremy, Exploring Arduino: Tools and Techniques for Engineering Wizardry, UK: John Wiley and Sons, 2019.
Chandrasekaran, Saravanan and R. Veeran, “Assistive Device for Neurodegenerative Disease Patients Using IoT,” in International Conference on Innovative Data Communication Technologies and Application, Springer, Charm, 2020, pp. 447- 452.
Lilius and Johanna, “The Contemporary Inner City and Families,” in Reclaiming Cities as Spaces of Middle-Class Parenthood, Palgrave Macmillan, Singapore, 2019, pp. 33-45.
Moriya, Hirokazu, M. Naoi, M. Nakatani, G. V. Aswegen, O. Murakami, T. Kgarume, K. W. Anthony, “Delineation of Large Localized Damage Structures Forming Ahead of An Active Mining Front by Using Advanced Acoustic Emission Mapping Techniques,” International Journal of Rock Mechanics and Mining Sciences, vol. 79, pp. 157-165, 2015.
Igwenagu and Chinelo. Fundamentals of Research Methodology and Data Collection. Lambert Academic Publishing: United Kingdom, 2016.
Van Casteren and Wilfred, “The Waterfall Model and the Agile Methodologies: A Comparison by Research Characteristics. [Online] Available: 10.13140/RG.2.2.10021. 50403. [Accessed On: 2021].