Solar Exhaust Fan with Temperature Sensor

  • Shahron Adli Hamzah
  • Suhazlan Suhaimi
  • Achmad Yani
DOI: https://doi.org/10.36079/lamintang.ijortas-0402.395
Keywords: Arduino Uno, Solar Exhaust Fan, Temperature Sensor

Abstract

Household nowadays need to face the global warming and also have to face increase in cost of living. In this era also, especially Malaysia is the one of developer country, so there so many developments. So this situation can lead to many crises to the household for example dust, high temperature, and the increasing in the electrical bill. This study was aimed to develop solar exhaust fan with temperature sensor that can help the household to overcome the issue. The project used the evolutionary prototyping model. Quantitative method approaches were used for this study where 33 participants were participating in the survey before design the system and 32 respondent respond to survey during the user acceptance testing.

Downloads

Download data is not yet available.

Author Biographies

Shahron Adli Hamzah

Department of Computing, Faculty of Art, Computing and Creative Industry. Universiti Pendidikan Sultan Idris. Perak, Malaysia.

Suhazlan Suhaimi

Department of Computing, Faculty of Art, Computing and Creative Industry. Universiti Pendidikan Sultan Idris. Perak, Malaysia.

Achmad Yani

Department of Industrial Engineering, Sekolah Tinggi Teknik Ar-Rahmah. Bintan, Indonesia.

This is an open access article, licensed under CC-BY-SA

Creative Commons License
Published
        Views : 552
2022-09-29
    Downloads : 754
How to Cite
[1]
S. A. Hamzah, S. Suhaimi, and A. Yani, “Solar Exhaust Fan with Temperature Sensor”, International Journal of Recent Technology and Applied Science, vol. 4, no. 2, pp. 84-96, Sep. 2022.
Issue
Vol 4 No 2: September 2022
Section
Articles

References

N. Iksan, I. Y. Panessai, M. M. Lakulu, S. K. Subramaniam, M. F. Saad, M. I. M. Damanhuri, "Developing a Prototype for Sun Tracker System Based on IoT: Controlled by Mobile App and Online Database Monitoring', American Journal of Applied Sciences, vol. 16, no. 1, pp. 11-25, 2019.

Hermansyah, Kasim, and I. K. Yusri, “Panel Remote Monitoring and Control System on Miniature Weather Stations Based on Web Server and ESP32”, International Journal of Recent Technology and Applied Science, vol. 2, no. 1, pp. 1-24, Mar. 2020.

M. K. Zapiee, D. Mohana, S. Balasingam, and I. Y. Panessai, “Disaster Sites Roaming Smart Car with Hand Gesture Controller”, International Journal of Recent Technology and Applied Science, vol. 4, no. 1, pp. 31-43, Mar. 2022.

I. D. Hashim, A. A. Ismail, and M. A. Azizi, “Solar Tracker”, International Journal of Recent Technology and Applied Science, vol. 2, no. 1, pp. 59-65, Mar. 2020.

E. E. Sekudan, A. M. Azhar, and K. B. Azahar, “IoT-Based Solar Energy”, International Journal of Recent Technology and Applied Science, vol. 3, no. 2, pp. 40-57, Sep. 2021.

N. Iksan, I. Y. Panessai, M. M. Lakulu, S. K. Subramaniam, M. F. Saad, M. I. M. Damanhuri, "Dual axis sun tracker system based on IoT", Journal of Advanced Research in Dynamical and Control Systemss, vol. 10, no. 13, pp. 2379–2394, 2018.

N. Iksan, “Pengontrolan Motor Dynamixel Ax-12 Pada Mobile Robot Junior”, DIMENSI, vol. 5, no. 3, pp. 539-551, November 2016.

A. A. Mahligai, N. Iksan, P. Gunoto, I. Y. Panessai, Perancangan Sistem Keamanan Brankas dengan Verifikasi Password dan Sidik Jari Berbasis IOT, Sigma Teknika, vol. 5, no. 1, pp. 100-107, Juni 2022.

M. A. Azizi and A. Zariman, “Displaying Health Status Based IoT ”, International Journal of Recent Technology and Applied Science, vol. 2, no. 1, pp. 25-35, Mar. 2020.

M. N. H. Muzaffar Alfian, A. N. Mas Erwan, and M. S. Mohamad Adenan, “Anti-Theft Box: Arduino Safety Box with IoT Notifications”, International Journal of Recent Technology and Applied Science, vol. 3, no. 2, pp. 67-80, Sep. 2021.

M. S. Mohamad Adenan, A. N. Mas Erwan, and M. N. H. Muzaffar Alfian, “Smart Smoke Detector”, International Journal of Recent Technology and Applied Science, vol. 3, no. 1, pp. 16-31, Mar. 2021.

G. D. Shivamadhu, A. Venkatesh, A. Alva, D. Nausheer, and S. Devi K. A, “PortaX Secure Automation System Using IoT: A Survey”, International Journal of Recent Technology and Applied Science, vol. 2, no. 1, pp. 66-74, Mar. 2020.

M. K. Zapiee, D. Mohana, S. Balasingam, and I. Y. Panessai, “Disaster Sites Roaming Smart Car with Hand Gesture Controller”, International Journal of Recent Technology and Applied Science, vol. 4, no. 1, pp. 31-43, Mar. 2022.

N. Saidatin, S. Nurmuslimah, and P. Bagus, “A Design Remote Control System to Feed Birds Using ESP8266 ”, International Journal of Recent Technology and Applied Science, vol. 2, no. 2, pp. 81-90, Sep. 2020.

K. B. Azahar, E. E. Sekudan, and A. M. Azhar, “Intelligent Egg Incubator”, International Journal of Recent Technology and Applied Science, vol. 2, no. 2, pp. 91-102, Sep. 2020.

S. Balasingam, M. K. Zapiee, and D. Mohana, “Smart Home Automation System Using IOT”, International Journal of Recent Technology and Applied Science, vol. 4, no. 1, pp. 44-53, Mar. 2022.

Z. Z. Abidin, M. A. A. Zawawi, “OOP-AR: Learn Object Oriented Programming Using Augmented Reality,” International Journal of Multimedia and Recent Innovation, vol. 2, no. 1, pp. 60-75, March 2020. DOI: 10.36079/lamintang.ijmari-0201.83

N. F. Z. Zakaria, Z. Z. Abidin, M. A. A. Zawawi, S. N. Shuhada, “Bloodbuddy: a Tracking System for Blood Donor Using GPS,” Journal of Engineering, Technology & Applied Science, vol. 2, no. 2, pp. 86-102, August 2020. DOI: 10.36079/lamintang.jetas-0202.117

N. A. Z. M. Noor, N. H. Hasbullah, “Sistem Temujanji Interaktif Berasaskan Web,” Journal of Engineering, Technology & Applied Science, vol. 2, no. 3, pp. 110-117, December 2020. DOI: 10.36079/lamintang.jetas-0203.144

N. Norhalim, A. Ismai, “An Early Development Process of an Augmented Reality-Based Healthy Diet Tool Prototype,” International Journal of Multimedia and Recent Innovation, vol. 2, no. 2, pp. 96-101, September 2020. DOI: 10.36079/lamintang.ijmari-0202.133