FMEA-Based Risk Assessment in Filter Tank Production
DOI:
Abstract
Quality assurance is an action to maintain customer satisfaction. As a prominent fabrication producer, Firm A, which receives regular orders from corporate clients, has been challenged with maintaining quality consistency during the production process of filter tanks. This study aims to identify risks and evaluate failures that occur during the filter tank production process based on the Failure Mode and Effects Analysis method. The FMEA stage was started with a walkthrough survey to identify defects, followed by brainstorming sessions with two expert respondents to determine the severity, occurrence, and detection score. Subsequently, the Risk Potential Number score was calculated. Research findings distinguished three types of defects during production stages, namely welding, asymmetric, and painting. Based on risk quantification, it was found that the highest defect score, 392, was attributed to the painting failure category, characterized by excessively thick paint results. This finding was followed by the second-highest score of 336, and the third with value of 294 as failure of asymmetric joints. The practical implication in complementary of the FMEA finding showed that systematic training, audits, and briefings are suggested to address the issues that cause the highest number of failures on fabrication process.
Downloads
Views : 267
Downloads : 185
References
S. Suhartini, M. Basjir, and N. Mahbubah, “Quality Analysis of E-Commerce Services in Indonesia,” in AIP Conf. Proc., vol. 2679, no. 1, Jan. 2023, doi: 10.1063/5.0111303.
M. Muslih and S. O. Marbun, “The Effect of Risk Management, Firm Age, and Firm Size on the Performance of Banking Companies Registered in Indonesia Stock Exchange Moderated By Corporate Governance and Budget as Control Variable,” International Journal of Science and Society, vol. 2, no. 4, pp. 1–15, 2020, doi: 10.54783/ijsoc.v2i4.2.
J. S. D. M. Reis, D. E. W. Silva, N. A. D. S. Sampaio, J. G. M. D. Barros, G. Santos, and L. C. F. M. Barbosa, “The Benefits of FMEA in Improving the Industrial Process of a Cabin Air Carrier,” Proceedings on Engineering Sciences, vol. 6, no. 3, pp. 1031–1040, Aug. 2024, doi: 10.24874/PES06.03.016.
A. L. N. Falah, K. Arief, and R. S. Riginianto, “Analisis Pengendalian Kualitas Pada Tempe Menggunakan Metode Seven Tools Dan FMEA,” Jurnal Teknologi dan Manajemen Industri Terapan, vol. 2, no. 3, pp. 212–223, Sep. 2023, doi: 10.55826/tmit.v2i3.264.
F. Yulsandi and N. Mahbubah, “Evaluasi Kualitas Produk Tas Ransel Berbasis Pendekatan Ishikawa Diagram dan Failure Mode and Effect Analysis,” Jurnal Rekayasa Sistem Industri, vol. 7, no. 2, pp. 13–23, May 2022, doi: 10.33884/jrsi.v7i2.5502.
A. Wicaksono and F. Yuamita, “Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ,” Jurnal Teknologi dan Manajemen Industri Terapan, vol. 1, no. 3, pp. 145–154, Sep. 2022, doi: 10.55826/tmit.v1iIII.44.
A. Szczyrba and M. Ingaldi, “Implementation of the FMEA Method as a Support for the HACCP System in the Polish Food Industry,” Management Systems in Production Engineering, vol. 32, no. 3, pp. 357–371, Sep. 2024, doi: 10.2478/mspe-2024-0034.
V. Pajić, M. Andrejić, and M. Sternad, “FMEA-QFD Approach for Effective Risk Assessment in Distribution Processes,” Journal of Intelligent Management Decision, vol. 2, no. 2, pp. 46–56, Apr. 2023, doi: 10.56578/jimd020201.
Ö. Arslan, N. Karakurt, E. Cem, and S. Cebi, “Risk Analysis in the Food Cold Chain Using Decomposed Fuzzy Set-Based FMEA Approach,” Sustainability, vol. 15, no. 17, p. 13169, Aug. 2023, doi: 10.3390/su151713169.
M. Sadeghi, A. Mahmoudi, and X. Deng, “Blockchain technology in construction organizations: risk assessment using trapezoidal fuzzy ordinal priority approach,” Engineering, Construction and Architectural Management, vol. 30, no. 1, pp. 265–289, Apr. 2022, doi: 10.1108/ECAM-01-2022-0014.
L. Mustakim and A. A. B. Dinariyana, “Risk Analysis of the 150 kV Overhead Line and Cable Construction Projects of Kariangau Substation Toward GIS 4 in The Nusantara Capital,” International Journal of Science and Society, vol. 7, no. 1, pp. 112–128, 2025, doi: 10.54783/ijsoc.v7i1.1377.
E. Bozdag and C. Kadaifci, “A Distance-Based Approach to Fuzzy Cognitive Maps Using Pythagorean Fuzzy Sets,” Int. J. Fuzzy Syst., vol. 27, no. 1, pp. 93–109, Jan. 2025, doi: 10.1007/s40815-024-01766-4.
I. M. Putri, “The Impact of Tax Avoidance on Tax Risk: Does Good Corporate Governance Matter?,” International Journal of Science and Society, vol. 6, no. 4, pp. 638–653, 2024, doi: 10.54783/ijsoc.v6i4.1326.
S. Ichsan, N. Susanti, and T. I. Mukhlis, “Comparative Analysis of Investment Risk and Return in Crypto Currency, LQ-45 Index Shares, Exchange Rates and Gold during the Covid-19 Pandemic,” International Journal of Science and Society, vol. 5, no. 3, pp. 408–418, 2023, doi: 10.54783/ijsoc.v5i4.804
A. Cahyono and Y. D. Nurcahyanie, “Identification and Evaluation of Logistics Operational Risk Using the Fmea Method at PT. XZY,” Aptisi Transactions on Technopreneurship (ATT), vol. 5, no. 1Sp, pp. 110–118, 2023, doi: 10.34306/att.v5i1Sp.306.
C. S. Bangun, “Application of SPC and FMEA Methods to Reduce the Level of Hollow Product Defects,” Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, vol. 8, no. 1, pp. 62–69, Jun. 2022, doi: 10.24014/jti.v8i1.16681.
H. C. Wahyuni, M. A. Rosid, R. Azara, and A. Voak, “Blockchain Technology Design Based On Food Safety and Halal Risk Analysis in the Beef Supply Chain With FMEA-FTA,” Journal of Engineering Research, vol. 13, no. 2, pp. 590–595, Jun. 2025, doi: 10.1016/j.jer.2024.02.002.
N. K. Azis and N. A. Mahbubah, “Pengendalian Mutu Proses Casting Casing Cover Type EN 1-315 Berbasis Integrasi Metode SPC dan FMEA,” Tek. Sains J. Ilmu Tek., vol. 8, no. 1, pp. 44–57, 2023, doi: 10.24967/teksis.v8i1.2142.
J. Sidauruk and S. Safaruddin, “Menghitung Efisiensi Termal Pada Alat Vertical Cement Mill Pabrik II PT Semen Baturaja Tbk,” PARADIGM: Journal Of Multidisciplinary Research and Innovation, vol. 1, no. 2, pp. 77–84, Jul. 2023, doi: 10.62668/paradigm.v1i02.756.
I. Ahmad, B. I. A. Muttaqin, and H. Chandra, “Implementasi Metode Six Sigma dengan Pendekatan DMAIC untuk Meminimalisasi Kecacatan Produk Pancong Pocong UMKM Ketintang,” Jurnal Teknik Industri Terintegrasi, vol. 7, no. 2, pp. 790–800, Apr. 2024, doi: 10.31004/jutin.v7i2.26813.
I. Fikri, N. Sulaksana, and E. Rochima, “Disaster Mitigation Model for Sustainable Tourism Development at the Nam Salu Openpit Geosite: Insights from the Belitong UNESCO Global Geopark,” International Journal of Science and Society, vol. 5, no. 4, pp. 493–505, 2023, doi: 10.54783/ijsoc.v5i4.858.
N. Kök and M. S. Yıldız, “New Generation FMEA Method in Automotive Industry: An Application,” Journal of Turkish Operations Management, vol. 7, no. 1, pp. 1391–1405, Apr. 2023, doi: 10.56554/jtom.1193787.
A. F. Ridlo, “Effectiveness Analysis of the Application of the Failure Mode and Effect Analysis Method with Failure Defense Task for Reliability Management Improvement in Sea Water Desalination System of PLTU Paiton Baru (1 X 660 MW),” IPTEK Journal of Proceedings Series, no. 5, pp. 29–33, 2019, doi: 10.12962/j23546026.y2019i5.6279.
G. Minguito and J. Banluta, “Risk management in humanitarian supply chain based on FMEA and grey relational analysis,” Socio-Economic Planning Sciences, vol. 87, p. 101551, Jun. 2023, doi: 10.1016/j.seps.2023.101551.
I. F. Himawan and N. Mahbubah, “Deteksi Defect Produk As Hidrolis Berbasis Pendekatan Failure Mode and Effect Analysis,” RADIAL: Jurnal Peradaban Sains, Rekayasa dan Teknologi, vol. 10, no. 2, pp. 240–252, Jan. 2023, doi: 10.37971/radial.v10i2.306.
B. Zhou, J. Chen, Q. Wu, D. Pamučar, W. Wang, and L. Zhou, “Risk Priority Evaluation of Power Transformer Parts Based on Hybrid FMEA Framework Under Hesitant Fuzzy Environment,” Facta Universitatis, Series: Mechanical Engineering, vol. 20, no. 2, pp. 385–409, 2022, doi: 10.22190/FUME220223013Z.
R. D. Hardianto and Nuriyanto, “Analisis Penyebab Reject Produk Paving Block dengan Pendekatan Metode FMEA dan FTA,” Jurnal Cakrawala Ilmiah, vol. 2, no. 12, pp. 4635–4648, Aug. 2023, doi: 10.53625/jcijurnalcakrawalailmiah.v2i12.6394
R. A. Putera, A. Aulia, A. S. Lesmana, and Firmansyah, “Efektivitas Briefing (Arahan) Dalam Meningkatkan Kinerja Karyawan Pada PT Bangun Selaras Bersama Bekasi,” Ekonomika Syariah: Jurnal Pemikiran dan Pengembangan Ekonomi Syariah, vol. 6, no. 2, pp. 15–30, Jan. 2021, doi: 10.33477/eksy.v6i02.8058.
B. Rahim et al., “Effectiveness of Project-Based Learning in Metal Welding Technology Course with STEAM Approach in Vocational Education,” TEM Journal, vol. 13, no. 2, pp. 1481–1492, May 2024, doi: 10.18421/TEM132-62.
S. Dwiyatno, S. Sulistiyono, A. Jubaedi, E. Krisnaningsih, and E. Rakhmat, “Perancangan Knowledge Management System dalam Meningkatkan Kemampuan Pemanfaatan Teknologi pada Pembelajaran,” Jurnal Ilmiah Sains dan Teknologi, vol. 6, no. 1, pp. 29–42, Jan. 2022, doi: 10.47080/sainstek.v6i1.1594.
A. A. Zakiyah, D. Ardyanto, M. Z. Fatah, and M. Ernawati, “Identifikasi Bahaya Proses Blasting dan Painting di Perusahaan Fabrikasi Menggunakan Job Hazard Analysis (JHA),” INSOLOGI: Jurnal Sains dan Teknologi, vol. 3, no. 2, pp. 248–261, Apr. 2024, doi: 10.55123/insologi.v3i2.3422.
